|
Model |
6 color printing machine |
|
|
|
Printing color |
6 colors |
|
|
|
Maximum material width |
1200mm |
|
|
|
Maximum printing width |
1160mm |
|
|
|
Maximum mechanical speed |
140 m / min |
|
|
|
Maximum printing speed |
30-120 M / min |
|
|
|
Alignment accuracy |
longitudinal 0.15mm transverse 0.15mm |
|
|
|
Retractable coil diameter |
Phi 1000 mm retractable roll / glue cartridge: Phi 76 mm (inner diameter) |
|
|
|
Impression force |
mechanical adjustment |
|
|
|
Landing version |
automatic hydraulic lifting and landing |
|
|
|
Anilox roller |
6 pieces of ceramic roller. |
|
|
|
Tension mode |
automatic feeding and discharging system is controlled by automatic tension detection system. |
|
|
|
Release/take-up mode |
using air shaft clamping material, 10 kg magnetic powder 2 sets, and equipped with a 2.2 kW motor combination take-up |
|
|
|
Edge correction method |
automatic photoelectric correction system |
|
|
|
Drying method |
electric heating |
|
|
|
Drying power |
15KW (special double side blowing, faster drying) |
|
|
|
Blower |
1.1KW * 2 1.5KW * 2 |
|
|
|
Main motor |
5.5KW |
|
|
|
Main frequency conversion |
speed regulation by frequency converter |
|
|
|
Inking motor |
decelerating motor (0.2 kW) |
|
|
|
Switchboard power |
35 kw |
|
|
|
Machine size |
5800* 3600 * 3500mm |
|
Bearing: Japan NSK one-way bearing German ASNU aluminum alloy guide wheel for hard oxidation, dynamic balance, static balance treatment
Scope of application: film, non-woven, woven bags, paper, etc.
The main features are:
1. simple operation, convenient color registration and long service life.
2. adopt motor, frequency conversion speed regulation, save electricity and run little fluctuation.
3. automatic stop inking motor, automatic start inking device.
4. using synchronous belt drive, printing size is accurate.
5. there are two sets of ventilation and heating devices. The central heating control system and grouping control are adopted.
6. the low rollers are made of special steel and treated by special process, and electroplated with 10 wire thick hard chromium protective layer.
7 aluminum alloy guide wheel for hard oxidation, dynamic balance and static balance treatment.
8 equipped with cold air molding bellows, it can effectively prevent defects such as adhesion after printing.
9. printing image clarity and strong sense of hierarchy
